Table of Contents
Advertisement
Recording
E
SCHEDULE recording
1
Adjusting the following settings using the control
button ({|}~).
• RESOLUTION
• CHANNEL
2
Select "RECORDING" using the control button
({|) and select "SCHEDULE" using the control
button (}~).
The following settings are necessary when performing
sensor detection.
• MOTION ZONE
• MOTION SENSITIVITY
• PRE RECORD
• POST EVENT RECORD
3
Select "SCHEDULE" using the control button ({|)
and press the ENTER button.
When the channel 1 is selected, "TIMER SET-CH1"
screen is displayed.
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSITIVITY
ALARM RECORDING
PRE RECORD
POST EVENT RECORD
AUDIO
TIMER SET
4
Select "ALL" or each day using the control button
({|) and set the recording mode using the ENTER
button.
Repeat the procedure to set a different recording mode.
-: DISABLE (Does not record)
C: CONTINUOUS recording
M: MOTION recording
A: ALARM recording
Input example:
TIMER SET - CH1
COPY FROM
COPY TO
0
3
6
ALL
SUN
-
C
-
A M
-
- - - - - - - - - - - - - - - - - -
MON
- -
-
-
- - - - - - - - - - - - - - - - -
A
C M
TUE
-
A M M
-
-
- - - - - - - - - - - - - - - - - -
WED
- - - - - - - - - - - - - - - - - - - - - - - -
THU
- - - - - - - - - - - - - - - - - - - - - - - -
FRI
- - - - - - - - - - - - - - - - - - - - - - - -
SAT
- - - - - - - - - - - - - - - - - - - - - - - -
19
• FRAME RATE
• QUALITY
RECORD
FULL
1 1
1 ips
NORMAL
SCHEDULE
FULL ZONE
9
-- -- -- --
ON
5 SECONDS
OFF
CH1
CH1
9
12
15
18
21
• Selecting an identical setting for every day
(Example: CONTINUOUS):
Move the cursor to "ALL", the display turns red.
Repeatedly pressing the ENTER button sets the
same setting for every day.
TIMER SET - CH1
COPY FROM
COPY TO
0
3
6
ALL
SUN
C C C C C C C C C C C C C C C C C C C C C C C C
MON
C C C C C C C C C C C C C C C C C C C C C C C C
TUE
C C C C C C C C C C C C C C C C C C C C C C C C
WED
C C C C C C C C C C C C C C C C C C C C C C C C
THU
C C C C C C C C C C C C C C C C C C C C C C C C
FRI
C C C C C C C C C C C C C C C C C C C C C C C C
SAT
C C C C C C C C C C C C C C C C C C C C C C C C
• Selecting the same setting for a whole day
(Example: MOTION):
Move the cursor to the day, the display turns red.
Repeatedly pressing the ENTER button sets the
same setting for the whole day.
TIMER SET - CH1
COPY FROM
COPY TO
0
3
6
ALL
SUN
- - - - - - - - - - - - - - - - - - - - - - - -
MON
M M M M M M M M M M M M M M M M M M M M M M M M
TUE
- - - - - - - - - - - - - - - - - - - - - - - -
WED
- - - - - - - - - - - - - - - - - - - - - - - -
THU
- - - - - - - - - - - - - - - - - - - - - - - -
FRI
- - - - - - - - - - - - - - - - - - - - - - - -
SAT
- - - - - - - - - - - - - - - - - - - - - - - -
• Selecting the same setting for a specified time
only every day (Example: MOTION):
Move the cursor to "ALL" and move the cursor to the
specified time using the control button (~), the
longitudinal bar changes to = (red). Press the
ENTER button repeatedly to set the same setting
(M).
TIMER SET - CH1
COPY FROM
COPY TO
0
3
6
ALL
=
SUN
- -
M
- - - - - - - - - - - - - - - - - - - - -
MON
- -
M
- - - - - - - - - - - - - - - - - - - - -
TUE
- -
M
- - - - - - - - - - - - - - - - - - - - -
WED
- -
M
- - - - - - - - - - - - - - - - - - - - -
THU
- -
M
- - - - - - - - - - - - - - - - - - - - -
FRI
- -
M
- - - - - - - - - - - - - - - - - - - - -
SAT
- -
M
- - - - - - - - - - - - - - - - - - - - -
5
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
CH1
CH1
9
12
15
18
21
CH1
CH1
9
12
15
18
21
CH1
CH1
9
12
15
18
21
Advertisement
Table of Contents
