Main Screen Basic Operations; A Switching The Display Mode Of The Screen - Sanyo DSR-2016 Instruction Manual

Main screen basic operations

A
Switching the display mode of the screen
Allows you to select the display mode for live and playback
video.
The following explanation is for when the "CH mode" is
set to 16 channels.
The available screens are limited when in 4 or 9 channel
mode.
b Single-screen display
Click the channel selection button on the operation panel or
select one screen and double-click.
The video of the specified camera is displayed in
single-screen.
Memo: Double-clicking on a single-screen display returns the
previous screen display.
b Quad-screen display
Click the quad-screen display button on the operation panel.
The video of the cameras connected to this unit is displayed
on quad-screen.
Memo: Each time the button is clicked the video of the next
four channels is displayed in order of the channel
numbers.
01 02
03 04
13 14
15 16
b Multi-screen display
Click the multi-screen display on the operation panel.
The video of the cameras connected to this unit is displayed
on multi-16 screen or multi-9 screen.
Memo: Each time the button is clicked the display switches in
Memo: <About selecting a camera video>
05 06
07 08
09 10
11 12
turn from the multi-16 screen to the multi-9 screen (2
patterns) video.
01 02 03
05 06 07
09 10 11
13 14 15
01 01 02 02
04 04
05 05
07 07 08 08
10 11
13
14
16 01
In case of the quad-screen display or multi-screen
display, when selecting the live video, the selected
frame changes to red color. The red frame shows the
live video was selected.
It is necessary to select a camera to perform the
following operation in quad-screen or multi-screen.
• Saving images (P56)
• PTZ camera operations (P57)
• Switching the audio output (
04
08
12 12
16
03 03
06 06
09 09
12
15
02
5
Audio controller: P53)
54