Table of Contents
Advertisement
Main screen structure and function of each part
Function of the operation panel
<16 channels>
1
2
8
9
G
: The display of the icon changes according
SW
to the selection made.
1 Scrolling connected sites (Select Site)
To change the connection destination select
the site name of the connection destination
using the pull down menu.
(Normally the site name of the present
connection destination is displayed.)
2 Connect/Disconnect button
: Displays the [Connect] dialog for
connection (P51)
SW
: Disconnects the connection
53
3 Screen display switch button (P54)
: Switching to quad-screen display
: Changing the display to a multi screen (multi-16 screen/ multi-9 screen)
: To sequence (camera switch) display
-
: Selecting a channel and switching to single-screen
display
4 Camera controller (Only for PTZ camera)
3
When clicking the controller button (
changes. (P57)
SW
4
5 Audio controller
Adjusts the audio output of live video and playback video.
: The audio is not output
SW
5
: The audio is output
VOLUME
: Adjusts the output volume
6
6 [SEARCH] button
Switches the main screen to search mode (P58)
7 [CAPTURE] button
7
Saving images (P56)
8 Recording button (P55)
: Sets recording function to ON
F
SW
: Sets recording function to OFF
9 Still button (P56)
H
: Freezes the live video
SW
: Unfreezes the live video
F Alarm output switch button
: Switches the alarm output (ALARM OUT 1) on the back panel
to ON/OFF (A The red button light up when an alarm output is
in progress)
G Menu button
: Displays the set up menu screen (P61)
H Exit button
: Exits the software and closes the screen
/
), the controller display
: For Pan/Tilt operations
: For Zoom/Focus operations
Advertisement
Table of Contents
