Accessing Internal Components; Special Precautions - Epson ExpressStation User Manual

Chapter 2

Accessing Internal Components

To access your computer's internal components, you need to
remove the cover. You may also need to remove the drive
housing. Follow the instructions in this chapter when you need
to do these tasks:
Be sure to read the following important safety precautions
before you begin.

Special Precautions

As you perform the procedures described in this chapter and in
Chapter 3, observe the following precautions to avoid
damaging your equipment or injuring yourself:
installing a variety of optional equipment, do not attempt a
procedure if you have any reservations about performing it;
ask your dealer for assistance.
computer and any peripheral devices, and then wait at least
30 seconds before you remove the cover. First disconnect
the power cord from the electrical outlet and then from the
computer's back panel. Then disconnect all peripheral
devices from the computer, including the monitor and
keyboard.
Accessing Internal Components 2-1