Removing The Cover - Epson ExpressStation User Manual

Removing the Cover

You must remove the computer's cover to access any of its
internal components. Before you begin, be sure you have read
the special precautions above. It is also a good idea to label any
peripheral device or network cables before you disconnect
them to ensure that you reconnect them correctly.
Follow these steps to remove the cover:
1. If necessary, unlock the computer's cover. (See Chapter 1 for
instructions.)
2. Remove the retaining screw securing the cover to the
computer, as shown in the illustration below.
3. Grasp the sides of the cover and pull it away from the
computer's back panel approximately one half inch. Then
lift it straight up and off the computer.
Accessing Internal Components
2-3