Epson ExpressStation User Manual page 21

Follow these steps to set your password(s):
1. To start the System Configuration program, insert the
Reference diskette in drive A.
2. Log onto drive A and type SD. Press [Enter) at the next two
screens to bring up the Main Menu.
3. Select Access System Utilities.
4. Thenselect Password Utility. You see the following:
Set Initial Power-on Password
Activate/Deactivate Network Password
Set Keyboard Password
Lock Keyboard
Return to Utilities Menu
Now follow the steps in the appropriate section(s) below.
Setting a power-on password
To set a power-on password, follow these steps:
1. Select Set Initial Power-on Password at the
Password Utility Menu.
2. You see a prompt to enter a password of up to seven
characters. Follow the instructions on the screen to enter the
password twice and return to the Password Utility Menu.
3. Your power-on password is also now your keyboard
password. If you want to set a different keyboard
password, see "Setting a keyboard password" below.
If you will be using your computer in a network, follow the
steps in the next section to activate a network password.
1-4 Using Your Computer
Password Utility Menu