Option Cards - Epson ExpressStation User Manual

J21 Settings
Jumper pins
1 - 3 *
3 - 5
2 - 4
4 - 6 "
9-11
11-13*
Factory setting
l

Option Cards

Your computer has two option slots which can accommodate
32-bit EISA option cards or S-bit and 16-bit ISA compatible
option cards.
Before you install an option card, check the power
requirements in the documentation that came with it. Make
sure the power required by both cards does not exceed the total
slot power limit, as defined in the table below.
Option slot power limits
Maximum current
For both slots
Enables you to use the BIOS SETUP program
Disables use of the BIOS SETUP program so unauthorized
users cannot change the settings you have chosen
Clears the power-on password
Retains the power-on password
Clears the current BIOS SETUP information in CMOS
memory and sets default parameters
Retains the current BIOS SETUP information in CMOS
memory
Sets normal FLASH memory operation
Sets the FLASH memory to operate in recovery mode if
you unsuccessfully attempted to download updated
BIOS information; allows start of a procedure to restore
the previous BIOS information
+5 Volts + 12 Volts
6 Amps 2 Amps
Installing and Removing Options
- 5 Volts -12 Volts
0.3 Amps 0.3 Amps
3-5