Installing And Removing Options - Epson ExpressStation User Manual

Chapter 3

Installing and Removing Options

This chapter provides instructions for installing and removing
the following optional equipment:
It also includes instructions for changing the main system
board jumper settings.
At the beginning of this chapter, you'll find a map of your main
system board so you can locate important components.
Before you perform any of the procedures described in this
chapter, read the "Special Precautions" on page 2-1. Then
remove the computer's cover (and the drive housing, if
necessary), as described in Chapter 2.
When you have finished installing or removing options, replace
the drive housing (if necessary) and the computer's cover as
described in Chapter 2; then follow the "Post-installation Setup
Procedures" on page 3-22 to update your configuration.
Installing and Removing Options
3-1