Accessing Internal Components - Epson Equity 386/33 PLUS User Manual

Chapter 3

Accessing Internal Components

To reach your computer's internal components, you need to
remove the cover. In some cases, you may also need to remove
the front panel and the subassembly (the metal case that holds
the drive bays and the power supply). The instructions in this
chapter explain how to do these tasks:
Be sure to heed all the cautions and warnings so you do not
injure yourself or damage the computer. If you have any
reservations about performing these steps yourself, ask your
Epson dealer for assistance.
Note
You only remove the subassembly to access the math
coprocessor or SIMM sockets, or to install or remove a disk
drive. You do not need to remove it to install or remove an
option card.
Accessing Internal Components
3-1