Handset Charging Rack; Battery Charging Rack; Usb-C Cable - ASCOM Myco 4 Quick Reference Manual

Handset Charging Rack

Handset Charging
B Place the handset in a charging slot. Push the handset into the charger to
fully insert it. If the handset has been correctly inserted, the charging screen
appears showing the battery charge level and the owner name.
When the green check mark icon appears on the screen and the LED turns
C
green, the battery is fully charged.
Handset Disconnection
Tilt the handset towards you and then lift the handset upwards to remove it from
the charger.

Battery Charging Rack

Battery Charging
B Remove the battery pack from the handset and place it in the charging slot.
Secure the battery by moving the battery cover lock to the left.
If the battery has been correctly inserted, the LED turns amber to show that
the battery is charging.
C
When the LED turns green, the battery is fully charged.
Battery Disconnection
B
Unlock the battery by moving the battery cover lock to the right.
C
Lift the battery and pull it out from the charger.
ascom
11
© 2023 Ascom. All rights reserved. TD 93546EN / August 2023 / Ver. A

USB-C Cable

B Open the charging port at the bottom of the handset.
C Attach the USB-C cable to the charging port and connect USB power supply
to a power outlet.
D When the LED turns green, the battery is fully charged.
E Close the charging port to prevent dust damage.
ascom
© 2023 Ascom. All rights reserved. TD 93546EN / August 2023 / Ver. A
12