Quick Settings; Handset Security; Low Battery; True Hot Swap - ASCOM Myco 4 Quick Reference Manual

Quick Settings

The Quick Settings panel can be used to make some fast changes in your Ascom
Myco 4, such as alter the brightness of the screen or put the handset in battery
save mode.
You can open the Quick Settings panel both in unlocked mode and on the lock
screen.
To see a selection of To open the whole
settings, swipe down Quick Settings panel,
from the top of the swipe down two times
screen. from the top of the
screen.

Handset security

The following recommendations are to ensure that the handset is accessible by
the intended personel only.
- Lock the device (turn off the screen) before leaving it unattended
Avoid change in any setting that may degrade security e.g., increase the
-
screen timeout.
- Use one of the following screen lock methods
ascom
7
To turn the setting
on / off , tap the
corresponding icon.
© 2023 Ascom. All rights reserved. TD 93546EN / August 2023 / Ver. A
Screen lock
Go to Settings → Security → Screen lock.
Choose one of the following:
- Pattern to draw a pattern to unlock the handset.
- PIN to enter their PIN code to unlock the handset.
- Password to enter the password to unlock the handset.

Low Battery

If the battery level is low, charge the battery or change it to a fully charged one as
soon as possible.
A low battery level is indicated a warning signal and the Battery
20%
may run out soon notification.
10% - 2% A very low battery level is indicated by a warning signal that sounds
at each battery percent change and the Battery may run out
soon notification.
Press Mute to silence the warning signal.
1% An empty battery is indicated by vibration and a warning signal that
sound every five seconds, and the Battery may run out soon
notification.
Press Mute to silence the warning signal.
NOTE: The vibration will stay on even if the handset is placed into
the "Do Not Disturb" or "Silent" mode.
True Hot-Swap
Ascom Myco 4 has an easily replaceable battery that can be changed without
powering down the handset or exiting your active apps. With hot-swap
functionality you can continue working and using your apps even when the battery
is being exchanged.
When removing the battery, your handset is operational for another 60
-
seconds.
- If the battery is not replaced within 60 seconds, the handset switches off.
ascom
© 2023 Ascom. All rights reserved. TD 93546EN / August 2023 / Ver. A
8