Handset Charging Rack - ASCOM Myco 3 Quick Reference Manual

Desktop Charger
Battery Charging
Remove the battery pack from the handset and place it in the charging slot for
1
batteries. Push the battery in until it clicks into the locked position.
If the battery has been correctly inserted, the LED turns amber to show that
the battery is charging.
When the LED turns green, the battery is fully charged.
2
Battery Disconnection
Push the battery down in charger.
1
Tilt the battery towards you and then lift it upwards to remove it from the
2
charger.
ascom
11
© 2021 Ascom. All rights reserved. TD 93301EN / March 2021 / Ver. C

Handset Charging Rack

Handset Charging
Place the handset in a charging slot. Push the handset into the charger to
1
fully insert it. If the handset has been correctly inserted, the charging screen
appears showing the battery charge level and the owner name.
When the green check mark icon appears on the screen and the LED turns
2
green, the battery is fully charged.
Handset Disconnection
Tilt the handset towards you and then lift the handset upwards to remove it from
the charger.
ascom
© 2021 Ascom. All rights reserved. TD 93301EN / March 2021 / Ver. C
12