Battery Replacement; Charging Methods; Desktop Charger - ASCOM Myco 4 Quick Reference Manual

Table of Contents

Battery Replacement

Slide the battery cover lock to the right to release the battery.

While pressing and holding the upper part of the clip

pull it out

Press the clip once again. Insert a fully charged or new battery and press it in.

Slightly press on the battery and slide the battery cover lock to the left to lock

the battery.

The battery has been properly inserted if none of the battery parts is

detached.

The handset has a rechargeable battery that can be charged separately from the

handset. To charge it, use the Battery Charging Rack.

If you want to charge the handset, do it either with a Handset Charging Rack,

Desktop Charger or an USB-C cable.

With the Desktop Charger you can charge the handset.

ascom

, lift the battery

Use the desktop charger to charge only the handset.

Handset Charging

Place the handset in the charging slot for handsets. Push the handset into

the charger to fully insert it. If the handset is correctly inserted, the charging

screen appears showing the battery charge level and the owner ID.

When the green check mark icon appears on the screen and the LED turns

and

green, the battery is fully charged.

Handset Disconnection

Tilt the handset towards you and then lift the handset upwards to remove it from

the charger.

ascom

Table of Contents

Show Quick Links

Table of Contents