Connecting The Motor Power - X2 - Siemens SINAMICS S200 Compact Operating Instructions

4.4.3

Connecting the motor power - X2

Converter side
X2 Terminal Designation
U
V
W
Motor side
• 1FL2 shaft heights 20, 30, and 40
Motor power interface
Hybrid connector
• 1FL2 shaft heights 48 and 52
Motor power interface
M17 angular connector
• 1FL2 shaft heights 45, 65, and 90
Motor power interface
M23 angular connector
18
Motor phase U
Motor phase V
Motor phase W
Pin Designation
U Phase U
V Phase V
W Phase W
PE Protective grounding
+ Holding brake, positive
- Holding brake, negative
A Encoder power supply, 5 V
B Encoder power supply, reference ground
C Absolute encoder clock signal, positive
D Absolute encoder clock signal, negative
E Absolute encoder data signal, positive
F Absolute encoder data signal, negative
Pin Designation
U Phase U
V Phase V
W Phase W
PE Protective grounding
A Holding brake, positive
B Holding brake, negative
Pin Designation
1 Phase U
2 Phase V
3 Phase W
PE Protective grounding
Technical data
Maximum current limit: 20 A
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023