System Overview - Siemens SINAMICS S200 Compact Operating Instructions

4.1

System overview

SINAMICS S200 drive system with 1 AC line connection
* The interfaces X131 and X108 are available on the SINAMICS S200 converter only. For more information about the motor
holding brake connection on the SINAMICS S200 Basic converter, see Section "Connecting the motor holding brake - X108
(Page 19)".
① Fuse or motor starter protector
② Line filter (optional)
③ External braking resistor (optional)
④ SIMOTICS S-1FL2 motor
⑤ Motor power cable (with brake conductors)
⑥ Encoder cable
⑦ Shield plate
When using the components, make sure that they are connected to the ground correctly.
1)
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023
1)
1)
⑧ Shield clamp
⑨ 24 V DC power supply
⑩ STO plug
⑪ SD card (optional)
⑫ Commissioning device
⑬ Controller (for example, SIMATIC S7-1500)
⑭ PROFINET to the next participant
13