Table of Contents
Advertisement
The Commissioning Wizard of the web server guides users through the following quick setup steps.
Setting
Drive information
Motor
Encoder
Limits
I/O configuration
28
Description
The step provides information about the converter, motor, encoder and motor holding brake
being used. A specific drive name can be assigned.
The data of the motor being used are displayed. It is not possible to configure another motor.
The direction of rotation of the motor can be selected.
The data of the encoder being used are displayed. Configuration is not possible.
The converter limit values are shown graphically and in a tabular form. The following data
can be configured:
•
Limit values
•
Device supply voltage (only available for 400 V variants)
The configuration of the converter inputs and outputs is shown in a tabular form. In the
table, a function can be assigned to an input or output of the terminal. Specified functions
can be selected. Do not assign a function to more than one input or output.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023
Advertisement
Table of Contents
