Table of Contents
Advertisement
4.3
MOTION-CONNECT cables
①
M17/M23 circular connector
②
Hybrid connector
Connecting the cables to the motor
Cable connection example
16
③
Conductors for holding brake
④
Conductors for power supply
⑤
Cables for encoder
•
Do not put much stress upon cables or connectors while wiring.
Minimum bending radius (R) for the MOTION-CONNECT cables
–
Static: 4 x outer diameter
–
Dynamic: 7.5 x outer diameter
•
For medium and high inertia motors, you can adjust the cable
directions by rotating the connectors.
•
Before adjusting the cables, switch off the power supply. Otherwise,
the motor contains a hazardous voltage and a risk of electric shock.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023
Advertisement
Table of Contents
