8
. DRIVE AND DRIVEN PULLEYS/
Bet & Win 250
KICK STARTER
Install the drive belt air tube and tighten the
tube band screw.
Tube Band Screw
Universal Holder
DRIVE PULLEY
REMOVAL
Remove the left crankcase cover.
Hold the drive pulley using an universal
holder and remove the drive face nut and
washer.
Remove the drive pulley face.
Special
Universal Holder
Drive Pulley Face
Movable Drive Face
Remove the drive belt from the movable drive
face.
Drive Belt
INSPECTION
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit:
22.0mm
replace if below
*
Use specified genuine parts for
•
replacement.
8-4
www.PlanDeGraissage.org