KYMCO Bet & Win 250 Manual page 90

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
Check the clutch shoes for wear or damage.
Measure the clutch lining thickness.
Service Limit: 2.0mm replace if below
CLUTCH/DRIVEN PULLEY
DISASSEMBLY
Hold the clutch/driven pulley assembly with
the clutch spring compressor.
＊
Be sure to use a clutch spring
•
compressor to avoid spring damage.
Special
Clutch Spring Compressor
Set the tool in a vise and remove the clutch
drive plate nut.
Lock Nut Wrench, 39mm
Loosen the clutch spring compressor and
disassemble the clutch/driven pulley
assembly.
Remove the seal collar.
8-9
www.PlanDeGraissage.org
Bet & Win 250
Clutch/Driven Pulley
Clutch Spring Compressor
Lock Nut Wrench