KYMCO Bet & Win 250 Manual page 102

9
. FINAL REDUCTION
BEARING REPLACEMENT
(TRANSMISSION CASE COVER)
Remove the transmission case cover
bearings using the bearing remover.
Remove the final shaft oil seal.
Drive new bearings into the transmission
case cover.
BEARING REPLACEMENT (LEFT
CRANKCASE COVER)
Remove the drive shaft.
Remove the drive shaft oil seal.
Remove the left crankcase bearings using
the bearing remover.
9-5
www.PlanDeGraissage.org
Bet & Win 250
Bearing Remover, 15mm
Drive Shaft Bearing
Pilot, 15mm
Bearing Remover