KYMCO Bet & Win 250 Manual page 5

1
. GENERAL INFORMATION
n If the fuse is burned out, find the cause and
repair it. Replace it with a new one
according to the specified capacity.
n After operation, terminal caps shall be
installed securely.
n When taking out the connector, the lock on
the connector shall be released before
operation.
n Hold the connector body when connecting
or disconnecting it.
n Do not pull the connector wire.
n Check if any connector terminal is bending,
protruding or loose.
www.PlanDeGraissage.org
Confirm
Capacity
n The connector shall be inserted
completely.
n If the double connector has a lock, lock
it at the correct position.
n Check if there is any loose wire.
n Before connecting a terminal, check for
damaged terminal cover or loose negative
terminal.
n Check the double connector cover for
proper coverage and installation.
n Insert the terminal completely.
n Check the terminal cover for proper
coverage.
n Do not make the terminal cover opening
face up.
n Secure wire harnesses to the frame with
their respective wire bands at the
designated locations.
Tighten the bands so that only the
insulated surfaces contact the wire
harnesses.
Bet & Win 250
1-4