Fujitsu DL7600Pro User Manual page 110

USING SETUP MODE
< EMULATE>DPL24C+
<FONT >
COUR 10 PRSTG12
COUR-I N.SAN-N
<QUALITY>LETTER
5-6
To select a function from the <<FUNCTION>> menu:
1. Repeatedly press the "TEAR OFF" or "LOAD" button to
position the cursor on the left edge of the aluminum print guide
at the function you require.
2. Press the  button or the  button to select the function. If the
function has items and options, the printer prints the first item
and its options. The MENU1, MENU2, HARDWRE, ADJUST,
CONFIG, and GAP-ADJ functions contain items that have
selectable options. The other functions have neither items nor
options.
The first three MENU1 items and their options are shown below. Items
are enclosed in single brackets < >. A short underlined portion is current
option and long underlined portion is selected option.
XL24E ESC/P2
COMPRSD BOLDFCE PICA 10
N.SAN-B N.SAN-I TIMLS-N
REPORT DRAFT HI-DRFT
To select an option from the <item> menu:
1. Repeatedly press the "TEAR OFF" or "LOAD" button to
position the cursor on the left edge of the aluminum print guide
at the option you require.
2. Press the  button to select the option. The printer prints the
next item and its options. You can press  to select the option.
Then, the printer prints the previous item and its options.
3. After selecting the desired options, press the ONLINE button to
reprint the <<FUNCTION>> menu.
For each item, the short-underlined option is the current default
option (the option currently saved in the printer's permanent
memory). In the previous example, the default options are
Fujitsu DPL24C PLUS emulation, Courier 10 font, and letter
print quality.
The chart on the next page summarizes how to select options such as
emulation, font, and print quality and how to use functions that do not
have options.
CORRESP OCR-B OCR-A
TIMLS-B TIMLS-I DOWNLD0
SH-DRFT
COUR-N COUR-B
DOWNLD1
User's Manual