Table of Contents
Advertisement
INTRODUCTION
OPTIONS
SF940 single-bin feeder (front）.
1-4
Printer add-on options are listed below. For details, see Chapter 8.
Cut sheet feeder. The SF940 single-bin feeder is available as an
•
option. Two cut sheet feeders can be installed in front of and behind
the printer at the same time. A cut sheet feeder allows single cut
sheets and multiple-part cut sheets to be fed automatically.
Tractor unit. A second tractor unit may be bought as an additional
•
option if dual tractor feeding capability is required.
LAN card. A LAN card is available as a printer add-on option. A
•
user installable function, the LAN card can be installed only on
printer models with the Centronics parallel + USB interfaces. For
details, see Chapter 8.
Slot for LAN card is available.
(Centronics parallel + USB interfaces MODEL)
OPTIONS of DL7600Pro dot matrix printer
Replacing stacker with large stacker is required
when SF940 is installed in rear side.
SF940 single-bin feeder (rear）.
Tractor unit (rear)
User's Manual
Advertisement
Table of Contents
