Advertisement
Web Screen
Network settings
Software
Download Easy IP Setup Software (EasyIPSetup.exe) from the following website and then install them. [Windows]
Download URL
http://pro-av.panasonic.net/
Easy IP Setup Software (EasyIPSetup.exe)
This software sets the unit's network settings.
"Using Easy IP Setup Software to set the unit's settings" (see page 90)
Plug-in viewer software installer (nwcv4SSetup.exe)
Install the plug-in software (Network Camera View 4S) required to view IP images from the unit in a web browser.
"Installing the plug-in viewer software" (see page 91)
Using Easy IP Setup Software to set the unit's settings
The settings related to the unit's network can be set using the supplied Easy IP Setup Software.
To set the settings for a multiple number of units, the settings must be selected for each camera involved.
If the settings cannot be set using Easy IP Setup Software, set the settings for the unit and personal computer individually in
[MAINTENANCE] > [NETWORK] of the CCU menu.
"NETWORK" (see page 84)
NOTE
If, after the network settings have been set, another device on the same network has the same IP address, the network oper-
ations will not be performed properly. Set the IP address in such a way that it does not duplicate an existing IP address.
Do not set network settings from a multiple number of Easy IP Setup Software programs at the same time for a single camera.
Easy IP Setup Software cannot be used from a different subnet via a router.
It is not possible to display the unit or set its settings using an older version of Easy IP Setup Software (Ver.4.25 or earlier).
Setting Procedure
1. Start the Easy IP Setup Software.
2. Click the [Search] button.
- 90 -
Web Screen
Advertisement
