Advertisement
3. Turn the [SELECT] dial to move the cursor to the menu item you want to set, and then press the
[SELECT] dial.
The setting value of the selected menu item starts flashing and you can change it.
4. Turn the [SELECT] dial to change the value, and then press the [SELECT] dial.
Turning the [SELECT] dial changes the setting value and pressing the [SELECT] dial confirms the setting value.
When the setting value is confirmed and the flashing stops, you can move the cursor.
With some menu items, setting changes become effective while the setting value is in the flashing state; with others, changes become
effective when the [SELECT] dial is pressed to confirm the setting value.
Operation with menu items that have multiple setting items on one line
1. Turn the [SELECT] dial to move the cursor to the menu item you want to set, and then press the
[SELECT] dial.
The cursor becomes "↓" and you can use the [SELECT] dial to move the cursor to a setting item in the selected menu item.
2. Turn the [SELECT] dial to move the cursor to the item you want to set, and then press the [SELECT]
dial.
The setting value of the selected item starts flashing and you can change it.
SETTING(1/2)
COMPOSITE/PM
ANALOG PROMPT
RETURN FS
TRUNK1
TRUNK2
MONO SW
HD BAR SELECT
BAR LPF
BAR USER1
100%WHITE
BAR USER2
SD BAR SELECT
SETTING(1/2)
COMPOSITE/PM
ANALOG PROMPT
RETURN FS
TRUNK1
TRUNK2
MONO SW
HD BAR SELECT
BAR LPF
BAR USER1
100%WHITE
BAR USER2
SD BAR SELECT
BAR ID
BAR ID SWITCH
BRIGHTNESS
ID1 POSITION
V:00
ID1
ID2 POSITION
V:00
ID2
OFFSET
V:000
- 40 -
PM
1-OUT
OFF
RS422
RS422
OFF
SMPTE
9TAP
0%BLACK
SMPTE
NORMAL
1-OUT
OFF
RS422
RS422
OFF
SMPTE
9TAP
0%BLACK
SMPTE
OF F
1 00 %
H :0 0
0 00 0
H :0 0
2 22 2
H : 00 0
CCU menu
Advertisement
