Advertisement
Mounting the unit in a rack
Mounting the rack mount adapters
1. Remove the setting legs (A) secured to the unit.
Remove them using a Phillips screwdriver.
2. Mount the supplied rack mount adapters (B).
Mounting screws are not supplied. Use mounting screws removed from the unit using a Phillips screwdriver.
Tighten the mounting screws for rack mount adapters using a torque of 110 N·m or more.
B
A
A. Setting legs
B. Rack mount adapters
Mounting the unit in a rack
Use the unit securely mounted in a standard 19-type rack (depth: 600 mm [23-5/8 inches] or more) compliant with EIA or JIS stand-
ards or equivalent.
Securely fix the unit in place using screws that are appropriate for the rack.
Be sure to attach a support guide for supporting (A) the rear of the unit.
(Provide a support guide that is appropriate for the rack.)
A.
Support guide
Mounting positions
In the case of the EIA standard rack
76.2 mm
(3 inches)
NOTE
Do not block the ventilation holes when installing the unit.
B
A
A
A
A
In the case of the JIS standard rack
50 mm
(1-15/16 inches)
- 18 -
Introduction
Advertisement
