Advertisement
Item
Multicast port
Multicast TTL/HOP Limit
[User mng.] screen
The users and personal computers (IP addresses) that can access the unit from personal computers are registered in the [User mng.]
screen.
The [User mng.] screen consists of [User auth.] tab and [Host auth.] tab.
[User auth.] tab
Click the [User auth.] tab of [User mng.] screen.
Configure the user authorization settings for the personal computers that can access the unit.
Up to 24 users can be registered.
NOTE
If user authentication fails more than 8 times within a 30-second period from the same IP address (personal computer), access to
the unit will be disabled for a certain period.
Setting value
1024 to 37004 to 50000
1 to 16 to 254
- 108 -
Setting details
Enter the multicast port number (used when sending images from
the unit).
This needs to be set when [Transmission type] is set to [Multicast
port].
Only even numbers can be specified.
The port number cannot be set to 10670 and 49152.
Enter the TTL/HOP Limit value for multicast.
This needs to be set when [Transmission type] is set to [Multicast
port].
When transmitting H.264 images via the Internet, transmitted
images may not appear depending on proxy server settings,
firewall settings, etc. In such cases, consult your network admin-
istrator.
When displaying multicast images on a personal computer with
multiple LAN cards installed, disable the LAN cards that are not
used for reception.
Web Screen
Advertisement
