Advertisement
Item
SCENE FILE
REF LOAD
AUTO OPERARION STATUS
SYSTEM
This is the selection screen for the SYSTEM menu.
Setting
Item
value
INITIALIZE
-
FACTORY
-
INITIALIZE
ROP CONNCT
FRONT
REAR
SERIAL
-------
ROP CONNCT
CONNCT
-------
NETWORK
Initialize the Unit Settings (INITIALIZE)
Initialization Procedure
1. Turn the [SELECT] dial to move the cursor to [INITIALIZE], and then press the [SELECT] dial.
2. Turn the [SELECT] dial to select [YES?], and then press the [SELECT] dial.
Initialization begins.
Data Initialized
: Initialized ×: Not initialized
CCU menu
OPERATION
UHD SETTING
Setting
value
ON
OFF
ON
OFF
ON
OFF
SYSTEM
INITIALIZE
FACTORY INITIALIZE
ROP CONNCT SERIAL
Return the menu items to the factory default values.
"Initialize the Unit Settings (INITIALIZE)" (see page 87)
Return the unit's settings to the factory default values.
When you place the cursor on [FACTORY INITIALIZE] and press the [SELECT] dial, [FACTORY
INITIALIZE? NO/YES] appears. Select [YES] to start initialization.
Controls from the camera, ROP, or MSU cannot be performed during initialization.
Displays the status of ROP connection (serial connection) to the unit.
FRONT
Connection is to the front panel [ROP] connector.
REAR
Connection is to the rear panel [ROP] connector.
-------
No serial connection.
Displays the status of ROP connection (IP connection) to the unit.
CONNECT
Connection is by IP connection.
-------
No IP connection.
Setting details
Set display of picture monitor operation display item (SCENE FILE)
to ON or OFF.
Set display of picture monitor operation display item (REF LOAD)
ON/OFF.
Set display of picture monitor operation display item (AUTO) to ON
or OFF.
-----
NETWORK
-----
Setting details
INITIALIZE
- 87 -
CCU menu
___ indicates factory default settings.
FACTORY INITIALIZE
Advertisement
