Panasonic AK-UCU500P Operating Instructions Manual page 42

3. Turn the [SELECT] dial to change the character, and then press the [SELECT] dial.
Turning the [SELECT] dial changes characters, and pressing the [SELECT] dial confirms character changes.
When a character has been input and the flashing stops, you can move the cursor.
If you press the [SELECT] dial while the cursor is on the left of a menu item, the cursor becomes "→" and you can select the menu item.
NOTE
Turning the [SELECT] dial clockwise while pressing it increases the speed at which the number increases (turning it coun-
terclockwise decreases the number). Turning the dial more increases the speed even more. This operation is effective for making
a large change to a value when the setting width is large (e.g., IP address or port number).
BAR ID
BAR ID SWITCH
BRIGHTNESS
ID1 POSITION V:00
ID1
ID2 POSITION V:00
ID2
OFFSET V:000
BAR ID
BAR ID SWITCH
BRIGHTNESS
ID1 POSITION V:00
ID1
ID2 POSITION V:00
ID2
OFFSET V:000
BAR ID
BAR ID SWITCH
BRIGHTNESS
ID1 POSITION V:00
ID1
ID2 POSITION V:00
ID2
OFFSET V:000
- 42 -
OF F
1 00 %
H :0 0
0 00 0
H :0 0
2 22 2
H : 00 0
OF F
1 00 %
H :0 0
0 00 1
H :0 0
2 22 2
H : 00 0
OF F
1 00 %
H :0 0
0 00 1
H :0 0
2 22 2
H : 00 0
CCU menu