Table of Contents
Advertisement
Setting method: Turn the knob to change the value of cursor position in the Parameter
bar. Press the ◄ / ► direction key to move the cursor.
After setting, wait a few seconds (saving the parameters requires some time), and restart
the waveform generator so that the new setting can be applied.
About the application of this setting, please refer to "Using LAN Port" on P35.
To Set the System
Language Setting
Press Utility and choose System, press F1 to switch between English/Chinese.
Power On Setting
(1) Press Utility and choose System, press F2 to select Power On.
(2) Press F2 to switch between Default/Last. Default means that all the settings return
to default when powered. Last means that all the settings return to the last one when
powered.
To Return to Default Setting
Press Utility and choose System, press F3 to select Set to Default. All the settings
will be set to default. The default settings of the system are as follows:
To Set the Beep
(1) Press Utility and choose System, press F4 to enter the second page of the menu.
(2) Press F1 to select Beep.
(3) Press F1 to switch between On/Off. On is to activate the sound when the system
informs you. Off is to deactivate it.
View System Information
(1) Press Utility and choose System, press F4 to enter the second page of the menu.
(2) Press F2 to select Sys info. You can view the Version and Serial Number.
To Set the Clock Source
(1) Press Utility and choose System, press F4 to enter the second page of the menu.
(2) Press F3 to select Clock.
(3) Press F3 to switch between Internal/External.
To
Use Built-in Help
(1) Press Help function button, the catalog will display in the screen.
(2) Press F1 or F2 to choose help topic, or just turn the knob to choose.
33
Advertisement
Table of Contents
