Power-On Check; Ac Power Input Setting; Power On - Aktakom AWG-4151 User Manual

2. Check the Accessories
The supplied accessories have been already described in the Appendix B
"Accessories" of this Manual. You can check whether there is any loss of accessories
with reference to this description

Power-On Check

AC Power Input Setting

ADG-4151 adopt 110V/220V AC power source. Users should regulate the voltage scale of
the Power Switch according to the standards in their own country (see Figure 4-2) at the
rear panel and use an appropriate fuse.
Voltage Fuse
110V 125 V, F4AL
220V 250 V, F2AL
To change the voltage scale of the instrument, do the following steps:
(1) Turn off the power button at the front panel and remove the power cord.
(2) Check if the fuse installed before leaving factory (250 V, F2AL) can match with the
selected voltage scale; if not, pry the cover open using a straight screwdriver (see ⑦
in Figure 4-2), change the fuse.
(3) Regulate the Power Switch to the desired voltage scale.

Power On

(1) Connect the instrument to the AC supply using the supplied power cord.
Warning:
To avoid electric shock, the instrument must be grounded properly.
(2) Press down the power button at the front panel, the screen shows the boot screen.
8