NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
Steps
1. Open the latch, and disconnect the power-button board cable from the system board.
2. Peel off the power-button board cable from the display-assembly base and slide it through the antenna cable.
3. Remove the screw (M3x5) that secures the power-button board to the display assembly base.
4. Lift the power-button board, along with its cable, off the display assembly base.
32
Removing the power-button board
Removing the power-button board
computer. After working inside your computer, follow the instructions in
shield.
19
After
www.dell.com/