Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
hard
drive.
4. Remove the
system-board
5. Remove the
memory
module.
6. Remove the
wireless
card.
7. Remove the antenna.
8. Remove the
media-card
9. Remove the
power-button
10. Remove the microphone.
11. Remove the camera.
12. Remove the
coin-cell
battery.
13. Remove the fan.
14. Remove the
heat
sink.
15. Remove the speakers.
16. Remove the
system
board.
17. Remove the
display
panel.
18. Remove the
rubber
feet.
Procedure
Steps
1. Remove the 13 screws (M3x5 black) that secure the middle frame to the display-assembly base.
2. Slide and lift to release the tabs on the middle frame from the slots on the display-assembly base from the top.
Removing the middle frame
computer. After working inside your computer, follow the instructions in
shield.
reader.
board.
After
www.dell.com/
Removing the middle frame
37
57
Advertisement
Table of Contents
