Dell W19B001 Service Manual page 68

Table 4. System setup options—Advanced menu (continued)
Advanced
Intel Speed Shift Technology
SATA Option
Adapter Warnings
Intel Software Guard Extensions
Intel Software Guard Extensions allocated memory size
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
Integrity Check
Intel BIOS Guard Support
USB Configuration
Rear USB Ports
Power Options
Wake Up by Integrated LAN
AC Recovery
Deep Sleep Control
USB Wake support
USB Powershare Support State
68 System setup
Default: Enabled
Enable/disable Intel Speed Shift Technology support . Setting
this option to enable to allows the operating system to select
the appropriate processor performance automatically.
Default: Enabled
This option configures the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Enables or disables the power adapter warnings.
Default: Enabled
Enable/Disable/Software Controlled Intel® Software Guard
Extensions (SGX).
Default: Software controlled
Setting memory allocation for Intel Software Guard Extensions
(SGX). The support would be 128MB allocation by default.
When SGX is set to Software Controlled this setting is not
available and has no effect.
Enable or disable BIOS recovery from hard drive.
Default: Enabled
Enable or disable BIOS Auto-Recovery.
Default :Disabled
When enabled, BIOS checks the BIOS image integrity on every
boot. When Disabled, BIOS checks the image integrity only if
the previous boot did not complete.
Default :Disabled
Enable or disable the Intel BIOS Guard Support.
Default: Enabled
Allows you to enable or disable the rear USB ports.
Enable or disable the computer to be powered on by special
LAN signals.
Default: Disabled
Sets what action the computer takes when power is restored.
Enable or disable the Deep Sleep mode support.
Default: Enabled
Enable or disable USB devices to wake the system from
Standby.
Default: Enabled
Enable or disable charging USB devices.
Default: Disabled