Chapter 3: Removing The Stand; Easel Stand - Dell W19B001 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Easel Stand

Steps
1.
CAUTION: Place the computer on a flat, soft, and clean surface to avoid scratches on the display.
Place the computer on a clean and flat surface.
2. Using your fingertips, pry the stand cover off the back cover.
3. Remove the four screws (M3x5) that secure the stand to the system-board shield.
4. Lift and slide the stand from the system-board shield.
computer. After working inside your computer, follow the instructions in
Removing the stand
Removing the stand
3
After
www.dell.com/
11