Removing The Power-Button Board; Prerequisites; Procedure - Dell 24-3475 Service Manual

Removing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the stand.
2 Remove the back
3 Remove the system-board

Procedure

1 Open the latch, and disconnect the power-button board cable from the system
board.
2 Peel off the power-button board cable from the display-assembly base and slide
it through the antenna cable.
3 Remove the screw (M3x5) that secures the power-button board to the display-
assembly base.
42
computer. After working inside your computer, follow
After working inside your
cover.
shield.
computer. For more safety best
www.dell.com/
Before