NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Slide the microphone modules into the slots on the display-assembly base.
2. Replace the two screws (M2x2.5) that secure the microphone modules to the display-assembly base.
3. Route the microphone cable through the routing guides on the display-assembly base.
4. Connect the microphone cable to the system board.
Post-requisites
Steps
1. Replace the
system-board
2. Replace the
back
cover.
3. Replace the stand.
Replacing the microphone
computer. After working inside your computer, follow the instructions in
shield.
After
www.dell.com/
Replacing the microphone
22
35