NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
Steps
1. Disconnect the microphone cable from the system board.
2. Note the routing of the microphone cable, and then remove it from the routing guides on the display-assembly base.
3. Remove the two screws (M2x2.5) that secure the microphone boards to the display-assembly base.
4. Lift the microphone boards off the display assembly base.
34
Removing the microphone
Removing the microphone
computer. After working inside your computer, follow the instructions in
shield.
21
After
www.dell.com/