Dell W19B001 Service Manual page 69

Table 4. System setup options—Advanced menu (continued)
Advanced
Auto Power On
Auto Power On Mode
Auto Power On Date
Auto Power On Time
Numlock Key
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Table 5. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Asset Tag
Admin Password
System Password
HDD Password
Password change
Computrance
Firmware TPM
PPI Bypass for Clear Command
UEFI Firmware Capsule Updates
This option sets the time of day when you would like the
system to turn on automatically.
System turns on automatically.
Auto power on date.
Auto power on time.
Allows you to set the status of the Numlock key during boot to
On or Off.
Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
The SupportAssist OS Recovery option will enable or disable
the boot flow for SupportAssist OS Recovery tool in the event
of certain system errors. If the SupportAssist OS Recovery
setup option is set to disabled then all automatic boot flow for
SupportAssist OS Recovery tool will be disabled.
Default: Disabled
Displays the Unlock Setup status.
Displays the administrative password status.
Displays the system password status.
Displays the hard-drive password status.
Displays the asset tag of your computer.
Allows you to set the admin password.
Allows you to set the system password.
Allows you to set the hard drive password.
Allows you determine whether changes to the System and
Hard Disk passwords are permitted when an administrator
password is set.
Allows you to help track assets and provide recovery
services in the event the computer is lost or stolen.
Allows you to enable or disable the firmware TPM function.
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take effect immediately..
Allows you to enable or disable the UEFI Firmware Capsule
Updates function.
Default: Enabled
System setup 69