NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
About this task
NOTE:
Replace the DIMM2, and then replace the DIMM1.
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle.
3. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Post-requisites
Steps
1. Replace the
system-board
2. Replace the
back
cover.
3. Replace the stand.
Replacing the memory module
computer. After working inside your computer, follow the instructions in
shield.
www.dell.com/
Replacing the memory module
12
After
23