Table of Contents
Advertisement
9. Replace the four screws (M3x5) that secure the display panel to the display-assembly base.
10. Connect the display-backlight cable to the display panel, and then connect the touch-screen cable (optional) to the system
board.
11. Push the securing clips inward, and connect the display cable to the system board.
12. Adhere the tape that secures the display cable to the connector on the system board.
Post-requisites
Steps
1. Replace the
system-board
2. Replace the
back
cover.
3. Replace the stand.
56
Replacing the display panel
shield.
Advertisement
Table of Contents
