Additional Maintenance In Potentially Explosive Environments - Bredel 40-100 Operating Manual

Item
9. Change the lubricant.
Change the oil in the
10.
11. Replace the pump seal.
12. Replace the wear ring.
Replace the pressing
13.
14. Replace the bearings.
Maintenance and
15. periodic inspection of
the gearbox and motor.
8.3

Additional maintenance in potentially explosive environments

The following maintenance scheme shows the additional maintenance and periodic inspections that
need to be carried out on the hose pump to guarantee an optimal safety, operation and life of the
pump in a potentially explosive environment. Refer to the separate ATEX manual, part number 28-
29210322.
Action
Replace the According to ATEX regulations after 20,000 hrs.
bearings.
Clean the In potentially explosive (dust) atmospheres, the
hose pump.
m-bredel-40-100-en-05
Action
whichever comes first.
Refer to "Lubricant for
gearbox.
gearbox" on page 100
Wear on the running
shoes.
Before start-up of the
pump and at scheduled
To be carried out
service or when damage is suspected.
dust must be removed regularly.
To be carried out
After every second
hose change, after
5000 service hours,
after a year or after
hose rupture
If necessary.
If necessary.
surface.
If necessary.
intervals during
operation.
Remark
Refer to "Changing lubricant" on
page 52
Refer to "Changing oil in the
gearbox" on page 53
Refer to "Exchanging
replacement parts" on page 65
Refer to "Exchanging
replacement parts" on page 65
Refer to "Exchanging
replacement parts" on page 65
Refer to "Exchanging
replacement parts" on page 65
Refer to the manuals of the
gearbox and the motor.
Remark
Refer to "Exchanging
replacement parts" on page 65
50