11.2
Lubricant for gearbox
In the majority of the cases a mineral oil ISO VG 150 or ISO VG 220 is recommended. In case of very
low ambient temperatures a mineral ISO VG 100 is advised. In case of high ambient temperatures or
a relatively wide range of ambient temperatures a synthetic oil is recommended. Also in case of very
high loads, resulting in high operating temperatures a synthetic oil is to be preferred.
Use of oil with EP (Extreme Pressure) additives is strongly recommended. Do not mix oils of different
types, i.e. mineral, polyglycol and other synthetic lubricant. Refer to the documentation supplied with
the gearbox for how to care about lubrication. For the food industry as well as for agricultural areas
and nature reserves, special grade lubricants are available.
The table below is an indication for proper viscosity values.
If you have any questions, contact your Bredel representative for advice.
Recommended lubricant parameters for the Bredel gearboxes
Ambient temperature
Viscosity acc. to ISO 3448
Oil change interval
11.3
Electric motor
Construction
Materials
Number of poles
Voltage - frequency*
Protection class in accordance with
IEC 34-5
Insulation class
Temperature class
* Unless specified otherwise.
m-bredel-40-100-en-05
Mineral Oil
-20 to +5 °C
+5 to +30 °C
VG 100
VG 150-220
5,000 hours
size IEC-80/90: Housing and connection box: aluminium End
size IEC-100 and larger: Housing, connection box and end
up to 2.2 kW: 230 / 400 V - 3 phases - 50 Hz
3.0 kW and larger: 400 / 690 V - 3 phases - 50 Hz
+30 to +50 °C
VG 320
IM B5 (flange type)
shields: cast-iron
shields: cast-iron
4 or 6 poles
IP55
F
B
Synthetic oil
-30 to +65 °C
VG 150-220
20,000 hours
100