Safety; Symbols; Intended Use - Bredel 40-100 Operating Manual

2

Safety

2.1

Symbols

In this manual the following symbols are used:
WARNING
Procedures which, if not carried out with the necessary care, may result in
serious bodily harm.
CAUTION
Procedures which, if not carried out with the necessary care, may result in
serious damage to the hose pump, the surrounding area or the
environment
Information on environmentally-friendly disposal or recycling of materials.
Procedures, remarks, suggestions or advice which refer to use in potentially explosive
atmospheres in accordance with the ATEX Directive 2014/34/EU.
2.2

Intended use

The hose pump is exclusively designed for pumping suitable products. Every other or further use is
not in conformance with the intended use. This is the use for which the technical product is intended
in accordance with the specifications of the manufacturer, inclusive of his indications in the sales
brochure. In case of doubt it is the use, which appears to be its intended use judging from the
construction, execution and function of the product, and its description in the user's documentation.
Only use the pump in conformance with the intended use described above. The manufacturer cannot
be held responsible for damage or harm resulting from use that is not in conformance with the
intended use. If you want to change the application of your hose pump, contact your Bredel
representative first.
WARNING
The pump is configured for use with specific fluids for which the chemical
compatibility of the pump materials has been approved. Before using it in
any application it is required to check the compatibility of the pump
materials. Incompatible pumphead material, hose liner, hose connections
and lubricant can lead to serious damage and safety hazards. Always
contact your Bredel representative first.
14 m-bredel-40-100-en-05