1
General
1.1
How to use this manual
This manual is intended as a reference book by means of which qualified users are able to install,
commission and maintain the hose pumps Bredel 40, Bredel 50, Bredel 65, Bredel 80, and Bredel 100.
1.2
Original instructions
The original instructions for this manual have been written in English. Other language versions of this
manual are a translation of the original instructions.
1.3
Other supplied documentation
Documentation of components such as the gearbox, the motor, and the frequency controller is not
included in this manual. However, if additional documentation is supplied, you must follow the
instructions in this additional documentation.
1.4
Service and support
Some specific adjustments, installation and maintenance or repair jobs fall beyond the scope of this
manual. In case of doubt, consult your Bredel representative.
Make sure that you have the following data at hand:
•
Serial number of the hose pump
•
Part number of the pump hose
•
Part number of the gearbox
•
Part number of the electric motor
•
Part number of the frequency controller
You will find these data on the identification plates or stickers on the pumphead, the pump hose, the
gearbox, and the electric motor.
See also
Refer to "Description" on page 18
12
m-bredel-40-100-en-05