Warranty Conditions - Bredel 40-100 Operating Manual

3

Warranty conditions

The manufacturer offers a two-year warranty on all parts of the hose pump. This means that all parts
will be repaired or replaced free of charge, with the exception of consumables such as pump hoses,
ball bearings, wear rings, seals and compression rings, or parts which have been used wrongly or
have been misused, whether or not they have been intentionally damaged. If genuine Watson-
Marlow Bredel B.V. (hereafter called Bredel) parts are not used, any warranty claim is void.
Damaged parts which are covered by the applicable warranty conditions can be returned to the
manufacturer. The parts must be accompanied by a fully filled in and signed safety form as present in
the back of this manual. The safety form must be applied to the outside of the shipping carton. Parts
which have been contaminated or which have been corroded by chemicals or other substances which
can pose a health risk must be cleaned before they are returned to the manufacturer. Furthermore, it
should be indicated on the safety form which specific cleaning procedure has been followed, and that
the equipment has been decontaminated. The safety form is required even if the parts have not been
used.
Warranties purporting to be on behalf of Bredel made by any person, including representatives of
Bredel, its subsidiaries, or its distributors, which do not accord with the terms of this warranty shall
not be binding upon Bredel unless expressly approved in writing by a Director or Manager of Bredel.
m-bredel-40-100-en-05 17