Operation
DMX Configuration
The Intimidator Scan 360 works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product's channels could be
restricted.
The Intimidator Scan 360 uses up to 12 DMX channels, which defines the highest configurable address to 501.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until Address shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from 001–512.
4. Press <ENTER>.
DMX Personalities
The Intimidator Scan 360 has two DMX personalities: an 8-channel personality and a 12-channel personality.
To select a DMX personality, follow the instructions below.
1. Press <MENU> repeatedly until Run Mode shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select DMX.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select the DMX personality, from 8Ch or 12Ch.
6. Press <ENTER>.
Gobos
Intimidator Scan 360 User Manual Rev. 3
7