Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ SHOCKER PANEL FX
Summary of Contents for Chauvet DJ SHOCKER PANEL FX
- Page 1 User Manual...
- Page 2 Edition Notes The Shocker Panel FX User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Shocker Panel FX as of the release date of this edition. Trademarks Chauvet, Chauvet DJ, the Chauvet logo, and Shocker are registered trademarks or trademarks of Chauvet &...
-
Page 3: Table Of Contents
Automatic Programs................... Automatic Speed....................Dimmer....................... Dimmer Curve ....................DMX Loss......................Sound-Active Mode.................... Sound Sensitivity....................Custom Color Mixing ..................Wired Master/Slave Mode................5. Maintenance..................Product Maintenance ..................6. Technical Specifications..............Contact Us....................Warranty & Returns..................Shocker Panel FX User Manual Rev. 1... -
Page 4: Before You Begin
Important installation or configuration information. The product may not function correctly if this information is not used. Useful information. Shocker Panel FX User Manual Rev. 1... -
Page 5: Safety Notes
♦ Set this product on a flammable surface. Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Shocker Panel FX User Manual Rev. 1... -
Page 6: Introduction
Product Overview Safety cable pass-through in/ out display Fuse Menu Microphone Power holder buttons in/ out Product Dimensions 12.2 in 310 mm 6.7 in 170 mm 4.3 in 12.7 in 110 mm 323 mm Shocker Panel FX User Manual Rev. 1... -
Page 7: Setup
It is possible to link up to 5 Shocker Panel FX products on 120 VAC or up to 10 products on 230 VAC. The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, consult with the local Chauvet distributor as power linking connectors and requirements may differ by country or region. -
Page 8: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Shocker Panel FX may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming. -
Page 9: Operation
Press to scroll down the list of options or to find a lower value <ENTER> Press to activate a menu option or a selected value Menu Map Refer to the Shocker Panel FX product page on www.chauvetdj.com for the latest menu map. Mode... -
Page 10: Dmx Configuration
DMX_Primer_rev05_WO.pdf. Personality and Starting Address The Shocker Panel FX uses up to 47 DMX channels in the 47Ch DMX mode, which defines the highest configurable/recommended address to 466. When selecting a starting DMX address, always consider the number of DMX channels the DMX mode uses. - Page 11 000 255 RGB program speed, slow to fast – – 006 255) Color macro 000 005 No function – – (When Ch. 7 or 4 are 006 255 Mixed colors 006 255) Shocker Panel FX User Manual Rev. 1...
- Page 12 240 247 Auto program 29 248 255 Auto Program 30 White program speed – – (When Ch. 14 or 11 are 000 255 White program speed, slow to fast 006 255) Shocker Panel FX User Manual Rev. 1...
- Page 13 006 255) – – Red 1 000 255 0–100% – – Green 1 000 255 0–100% – – Blue 1 000 255 0–100% – – Red 2 000 255 0–100% Shocker Panel FX User Manual Rev. 1...
- Page 14 026 050 Dim Curve 1 051 075 Dim Curve 2 – Mode 076 100 Dim Curve 3 101 125 Dime set by unit display 126 150 RESET Fixture Shocker Panel FX User Manual Rev. 1...
-
Page 15: Standalone Configuration
3. Use <UP> or <DOWN> to select oFF, Cur1, Cur2, or Cur3. 4. Press <ENTER>. DMX Loss To set the DMX Loss mode on the Shocker Panel FX, follow the instructions below: 1. Press <MENU> repeatedly until LoSS shows on the display. 2. Press <ENTER>. -
Page 16: Sound Sensitivity
The Master/Slave mode allows a single Shocker Panel FX product (the “master”) to control the actions of one or more Shocker Panel FX products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be set to operate in slave mode. -
Page 17: Maintenance
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Shocker Panel FX User Manual Rev. 1... -
Page 18: Technical Specifications
Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 8, 18, 34, or 47 Ordering Product Name Item Code UPC Number Shocker Panel FX 07052191 781462225223 Shocker Panel FX User Manual Rev. 1... -
Page 19: Contact Us
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Shocker Panel FX User Manual Rev. 1...