Programming Automatic Thread Cutting; Checking Properties Of A Pattern Combination - ELNA eXcellence 740 Manual

1
2
1

Programming Automatic Thread Cutting

To cut the threads automatically after sewing the pattern
combination, press the memory auto thread cut key after
programming the pattern combination.
The cutter sign will be indicated on the LCD screen and
the LED signal on the thread cutter button will turn on.
1 Cutter sign
2 LED signal
The machine will sew the pattern combination and cut the
threads, then stop automatically.
NOTE:
If you wish to cut the threads automatically after sewing
the desired pattern, press the memory auto thread cut
key after selecting the desired pattern.
When a pattern in the buttonhole group is selected, the
machine will cut the threads and stop automatically after
the pattern is completed.
When a pattern in any other group is selected, pressing
the auto-lock button or reverse button will cause the
machine to cut the threads and stop automatically.

Checking Properties of a Pattern Combination

You can check the total length, number of patterns and
stitch count of a pattern combination by pressing a
pattern icon on the LCD screen.
1 Total length in centimeters and inches
2 Number of patterns
3 Total stitch counts
2
NOTE:
The total length is a theoretical value not an actual
length.
3
91