Bartacks - ELNA eXcellence 740 Manual

1
2
1

Bartacks

Machine settings
Pattern:
Thread tension:
Presser foot:
Foot pressure:
Tacking is used to reinforce pockets, crotch seams and
belt carriers where extra strength is needed.
Sewing
Lower the needle at the starting point.
Lower the foot and sew until the machine stops
automatically.
The machine will sew a tacking 1.5 cm (9/16") long
2
automatically.
Sewing a shorter tack
To sew a tack shorter than 1.5 cm (9/16"), first stop the
machine after sewing the required length, and then press
the reverse button.
The required length has been determined.
3
Start the machine and continue sewing until the machine
stops automatically.
Sewing the same size tack
4
To sew another tack at the same size, simply start the
machine and it will stop automatically when finishing
sewing.
Sewing the tack at a different size
To sew the next tack at a different size, press the memory
key
36 (Buttonhole)
AUTO
Satin stitch foot F
7
1 Starting point
2 1.5 cm (9/16")
1 Starting point
2 Required length
3 Tack length
4 Reverse button
and start sewing from the beginning.
68